Custom Jewelry Displays

Custom Jewelry Displays

Custom jewelry displays are made to measure for a store window or counter, in the material and color chosen by the jeweler or jewelry brand. They cover rings, earrings, pendants, necklaces, bracelets, watches and sets, and the range is organized by covering material.

Each display is produced to the size and layout you specify, so a whole window can follow one color scheme. Custom displays are sold wholesale to jewelers and jewelry brands.

For ready-made displays, see Velvet Jewelry Displays and Leatherette jewelry displays, or browse all Jewelry Displays.

Custom Jewelry Displays | Wholesale | Boxpack

Subcategories

  • Bust Displays

    Custom jewelry display busts

    A display bust is the shaped form a necklace hangs on, so the customer sees how it falls on a neck rather than how it lies in a tray. It is the natural support for long chains, chokers and pendants on a chain. There are four sizes, from 77 x 78 x 170 mm to 155 x 135 x 330 mm, so several heights can stand in the same arrangement.

    On each product page you choose the material (microfiber in 18 colors, Nappa in 9 or velvet in 19) and then the color. If you need another height, a color that is not listed or a different design, we make it to measure. Lead time for these displays is 45 days. Sold wholesale to jewelers and the trade by Boxpack, a manufacturer since 1991.

    To complete the window: necklace and pendant displays, earring displays and display blocks and bases to raise the bust. The full range is under custom jewelry displays.

  • Necklace and Pendant Displays

    Custom necklace and pendant displays

    These are necks and stands that hold a necklace or a single pendant upright, at the angle a customer reads it from, instead of flat in a tray. They do two different jobs: a pendant needs to be seen face-on, a necklace needs to show its length. Sizes run from the low 57 x 57 x 24 mm stand for a single pendant to the 80 x 50 x 210 mm stand for a long chain, with a wide 101 x 73 x 176 mm neck form.

    On each product page you pick the material (microfiber in 18 colors, Nappa in 9 or velvet in 19) and the color, so the whole line can match. Sizes, colors or designs that are not in the catalog are made to measure. Lead time: 45 days. Sold wholesale to jewelers and fashion jewelry retailers.

    Pair them with bust displays, display panels and display blocks and bases to build levels. Full range: custom jewelry displays.

  • Earring Displays

    Custom earring displays

    Earrings are the smallest pieces in the window and the ones that most need a display: a pair has to be seen together, level and face-on. Depending on the model, earrings go through holes in the front, through holes in the tabs or into slits along the top, and there is a dedicated line for omega-back earrings. Sizes go from low formats of 57 x 57 x 24 mm and 48 x 45 x 35 mm up to columns 220 mm tall.

    On each product page you choose the material and the color: 18 colors in microfiber, 9 in Nappa and 19 in velvet. If the size, color or design you need is not there, we build it to measure. Lead time for these displays is 45 days. Sold wholesale to jewelers and the trade.

    For the rest of the counter: jewelry set displays, ring displays and necklace and pendant displays. Everything else is under custom jewelry displays.

  • Ring Displays

    Custom ring displays

    Displays for a single ring or for several, on the counter, inside the showcase or in the window. Depending on the model the ring is held by a tab, by a slot (lip) system or by a black ring holder, and there are round and conical shapes too. Single-ring displays run from 32 x 34 mm to 45 x 45 x 105 mm tall, so heights can be stepped within one arrangement; for several rings there are two models, 81 x 81 x 51 mm and 162 x 81 x 51 mm.

    Choose the material on each product page (microfiber in 18 colors, Nappa in 9 or velvet in 19), then the color. Anything that is not in the catalog, whether a size, a color or a design, we make to measure. Lead time: 45 days. Sold wholesale to jewelers by Boxpack, a manufacturer since 1991.

    They work with jewelry set displays, earring displays and display trays for the counter. Full range: custom jewelry displays.

  • Jewelry Set Displays

    Custom jewelry set displays

    A matching set of earrings and a ring sells better when it is seen complete. These displays hold all three pieces on one support: the earrings through holes in the tabs or in slots cut into the display, the ring on a tab. There is one low model, 84 x 66 x 30 mm, and two upright ones, 51 x 43 x 79 mm and 51 x 43 x 98 mm, that add height to the showcase.

    Material and color are chosen on each product page: microfiber in 18 colors, Nappa in 9 or velvet in 19. For another size, color or design, we make it to measure. Lead time for these displays is 45 days. Sold wholesale to jewelers and the trade.

    Complete the set with ring displays, earring displays and necklace and pendant displays. See all custom jewelry displays.

  • Bracelet and Watch Displays

    Custom bracelet and watch displays

    Bracelets and watches need a support that keeps them closed, with the dial or the clasp in view. There are cushions the piece is fastened around, from 80 x 80 x 40 mm to 155 x 75 x 45 mm; bars and platforms it rests on, up to 225 mm long, some with an elastic band at one end; forms the piece wraps around, from 57 x 57 x 50 mm to 189 x 71 x 136 mm, three of them on gold-colored metal legs; and a 101 x 73 x 176 mm bracelet display with slots.

    Pick the material on each product page (microfiber in 18 colors, Nappa in 9 or velvet in 19) and the color. Sizes, colors or designs outside the catalog are made to measure. Lead time: 45 days. Sold wholesale to jewelers, watch retailers and the trade.

    They pair well with display blocks and bases and display panels. Full range: custom jewelry displays.

  • Display Blocks and Bases

    Custom display blocks and bases

    They organize a window: a block lifts a piece of jewelry or another display, and a base groups several items on one surface. They are universal and can stand vertically or lie horizontally. There are 80 x 80 x 45 mm and 120 x 120 x 45 mm blocks, narrow blocks from 60 x 25 x 140 mm to 110 x 35 x 140 mm, flat bases from 300 x 300 mm to 360 x 260 mm, and a large 350 x 200 x 160 mm block.

    On each product page you choose the material (microfiber in 18 colors, Nappa in 9 or velvet in 19) and then the color, so blocks and displays can match. Other sizes, colors or designs are made to measure. Lead time for these displays is 45 days. Sold wholesale to the trade by Boxpack, a manufacturer since 1991.

    Use them with display panels, necklace and pendant displays and bracelet and watch displays. Full range: custom jewelry displays.

  • Display Panels

    Custom jewelry display panels

    A display panel is a covered board with a rear stand, placed upright on the counter or in the shop window. It works as a backdrop for an arrangement, separates collections within one showcase and brings the color of the material up to the customer's eye level. Sizes run from 120 x 100 mm to 320 x 250 mm, in landscape and portrait (250 x 320 mm) formats.

    Each product page lets you choose the material (microfiber in 18 colors, Nappa in 9 or velvet in 19) and the color. If the size, color or design you need is not in the catalog, we make it to measure. Lead time: 45 days. Sold wholesale to jewelers, brands and the trade.

    Combine them with display blocks and bases, necklace and pendant displays and bracelet and watch displays. Full range: custom jewelry displays.

  • Display Trays and Inserts

    Custom display trays and inserts

    Display trays keep jewelry in order on the counter and in the window, and they are what comes out of the showcase when a customer asks to see several pieces at once. Trays come in 160 x 225 x 30 mm and 315 x 225 x 30 mm, plus two square 238 x 238 mm trays, 37 and 78 mm high. Inserts sit in the tray compartments: the 46 x 50 mm inserts fit 24-slot trays and the 71 x 66 mm inserts fit 12-slot trays.

    Each product page lets you choose the material (microfiber in 18 colors, Nappa in 9 or velvet in 19) and the color, so trays and inserts can match. Another size, color or design is made to measure. Lead time for these displays is 45 days. Sold wholesale to jewelers and the trade.

    For the rest of the counter: display blocks and bases, necklace and pendant displays and ring displays. Full range: custom jewelry displays.